Skip to content
Coffs Coast Electrical
Commercial solar installed by Coffs Coast Electrical, the nearest system to Bellingen

Commercial solar / Bellingen

Commercial solar in Bellingen.

Solar and battery systems from 30 kW to 1 MW for Bellinger Valley businesses, sized from a two-week load study. We're based in Bonville, 24 km away.

Commercial inverters and battery storage installed by Coffs Coast Electrical

Local to Bellingen

24 km from our Bonville base.

Bellingen sits in the Bellingen Shire Council area, about 20 minutes from us by road. We design, install and connect commercial systems here the same way we do on the Coffs Coast: the load study first, then a written proposal with the savings and payback shown, then our own licensed crew on the roof.

Valley properties are often a long cable run from the street, and older rural switchboards weren't built for solar or a battery. We check the board and the run before we quote, and upgrade them ourselves where needed.

Essential Energy runs the network across Bellinger Valley. We lodge the connection application and handle the paperwork, including the Small-scale Technology Certificates on systems up to 100 kW.

Nearest system we've installed

Our closest commercial job to Bellingen.

Roof-mounted 95 kW solar array on the Mid Coast Trucks workshop in Macksville

Real install, real numbers

Mid Coast Trucks, 95 kW solar and 50 kWh battery

A truck dealership with heavy daytime load. Two weeks of logging first, then a 95 kW roof-mounted array with 50 kWh of battery to carry the afternoon peak.

Read the project

Bellingen questions

What businesses here ask us.

Do you install commercial solar in Bellingen?

Yes. Bellingen is 24 km from our Bonville base, about 20 minutes by road, and inside the 500 km we cover for commercial work. The same licensed crew that quotes the job installs it.

Who handles the grid connection in Bellingen?

We do. Essential Energy is the electricity network for Bellingen and the rest of northern NSW. We lodge the connection application, deal with any conditions that come back, and design the system inside the export limit they set.

How do you size a system for a Bellingen business?

From a two-week load study. We fit a power logger to your switchboard, record how the site actually uses power, then design around your daytime demand, peaks, operating hours and roof. You see the savings and payback before you decide.

Is Bellingen too far away for servicing?

No. Every commercial install includes inspections at one and two years, with thermal imaging of the key connections, wherever the site is. It's a short drive from our base.

Also serving Fernmount, Gleniffer, Thora, Raleigh and the wider Bellinger Valley.

Free quote

Get a free quote for your Bellingen site.